ZirCUT FD

CATEGORIES

Premium quality Zirconia Flap Disc. Made with genuine VSM ZK765X Zirconia Abrasive Material for best performance on all materials  and angle grinders. Fibreglass Backing. Shrink wrapped in 10s and packaged in white box.

Recommended for frequent use by demanding professionals who do not compromise on quality and performance.

ZirCUT Flap Discs are manufactured using the highest quality Self-Sharpening Zirconia Alumina abrasive material.

Discs made with continuous self-sharpening High-Tech Zirconia Alumina grain, achieve extremely high cutting rates, long lifetimes, better surface finish, and better economy.

buyersguide_abrasivematerial

Suitable for the following materials:

  • Carbon Steel
  • Stainless steel
  • Heat treated steels
  • High speed and tool steels
  • Alloyed Steels
  • Sheet metal
  • Cast iron
  • Non-Ferrous metals

Depending on the grinding angle and surface to be ground, Flap Discs are available in two types:

Type 27 – has flat surface and can achieve maximum efficiency when applied at a work angle of 0-15 deg angle. These discs are the most suitable for grinding flat surfaces.

t27-fd

Type 29 – has a slightly conical surface, for grinding at 10-25 deg angle. These discs are the most suitable for grinding contoured surfaces.

t29-fd

Specifications

SIZES4" / 4 1/2" / 5" / 6" / 7"TYPE:Flat (Type 27) / Conical (Type 29)
ABRASIVE MATERIAL:VSM Premium ZirconiaDENSITY:Standard
GRITS:24 / 36 / 40 / 60 / 80 / 120COLOUR:Blue
BACKING:FiberglassQUICK CHANGESAFE LOC / ZINC HUB
MAX RPM. (OD in inches - RPM)4" - 15,300 / 4 1/2" - 13,300 / 5" - 12,200 / 6" - 10,200 / 7"- 8,500

Item Numbers  Packaging and Availability

Item #SizeGritTypePkg. Qty.Availability
Z50400274" x 5/8"24G Z/AT27F10STOCK
Z50400374" x 5/8"36G Z/AT27F10STOCK
Z50400474" x 5/8"40G Z/AT27F10STOCK
Z50400674" x 5/8"60G Z/AT27F10STOCK
Z50400874" x 5/8"80G Z/AT27F10STOCK
Z50401274" x 5/8"120G Z/AT27F10STOCK
Z50400294" x 5/8"24G Z/AT29F10STOCK
Z50400394" x 5/8"36G Z/AT29F10STOCK
Z50400494" x 5/8"40G Z/AT29F10STOCK
Z50400694" x 5/8"60G Z/AT29F10STOCK
Z50400894" x 5/8"80G Z/AT29F10STOCK
Z50401294" x 5/8"120G Z/AT29F10STOCK
Z50450274 1/2" x 7/8"24G Z/AT27F10STOCK
Z50450374 1/2" x 7/8"36G Z/AT27F10STOCK
Z50450474 1/2" x 7/8"40G Z/AT27F10STOCK
Z50450674 1/2" x 7/8"60G Z/AT27F10STOCK
Z50450874 1/2" x 7/8"80G Z/AT27F10STOCK
Z50451274 1/2" x 7/8"120G Z/AT27F10STOCK
Z50450294 1/2" x 7/8"24G Z/AT29F10STOCK
Z50450394 1/2" x 7/8"36G Z/AT29F10STOCK
Z50450494 1/2" x 7/8"40G Z/AT29F10STOCK
Z50450694 1/2" x 7/8"60G Z/AT29F10STOCK
Z50450894 1/2" x 7/8"80G Z/AT29F10STOCK
Z50451294 1/2" x 7/8"120G Z/AT29F10STOCK
Z50500275" x 7/8"24G Z/AT27F10STOCK
Z50500375" x 7/8"36G Z/AT27F10STOCK
Z50500475" x 7/8"40G Z/AT27F10STOCK
Z50500675" x 7/8"60G Z/AT27F10STOCK
Z50500875" x 7/8"80G Z/AT27F10STOCK
Z50501275" x 7/8"120G Z/AT27F10STOCK
Z50500295" x 7/8"24G Z/AT29F10STOCK
Z50500395" x 7/8"36G Z/AT29F10STOCK
Z50500495" x 7/8"40G Z/AT29F10STOCK
Z50500695" x 7/8"60G Z/AT29F10STOCK
Z50500895" x 7/8"80G Z/AT29F10STOCK
Z50501295" x 7/8"120G Z/AT29F10STOCK
Z50600276" x 7/8"24G Z/AT27F102-7 DAYS
Z50600376" x 7/8"36G Z/AT27F102-7 DAYS
Z50600476" x 7/8"40G Z/AT27F102-7 DAYS
Z50600676" x 7/8"60G Z/AT27F102-7 DAYS
Z50600876" x 7/8"80G Z/AT27F102-7 DAYS
Z50601276" x 7/8"120G Z/AT27F102-7 DAYS
Z50600296" x 7/8"24G Z/AT29F102-7 DAYS
Z50600396" x 7/8"36G Z/AT29F102-7 DAYS
Z50600496" x 7/8"40G Z/AT29F102-7 DAYS
Z50600696" x 7/8"60G Z/AT29F102-7 DAYS
Z50600896" x 7/8"80G Z/AT29F102-7 DAYS
Z50601296" x 7/8"120G Z/AT29F102-7 DAYS
Z50700277" x 7/8"24G Z/AT27F10STOCK
Z50700377" x 7/8"36G Z/AT27F10STOCK
Z50700477" x 7/8"40G Z/AT27F10STOCK
Z50700677" x 7/8"60G Z/AT27F10STOCK
Z50700877" x 7/8"80G Z/AT27F10STOCK
Z50701277" x 7/8"120G Z/AT27F10STOCK
Z50700297" x 7/8"24G Z/AT29F10STOCK
Z50700397" x 7/8"36G Z/AT29F10STOCK
Z50700497" x 7/8"40G Z/AT29F10STOCK
Z50700697" x 7/8"60G Z/AT29F10STOCK
Z50700897" x 7/8"80G Z/AT29F10STOCK
Z50701297" x 7/8"120G Z/AT29F10STOCK

Add SAFE LOC (Patented), Quick Change

SAFE LOC is a 5/8″-11 threaded attachment for flap discs. Available for 4 1/2″, 5″, 6″ and 7″ discs with any backing type.

For Item with SAFE LOC Quick Change add S to the end of Item with 7/8″ Arbor Hole. e.g. Item: Z5045049 with 7/8″ AH will become Z5045049S with 5/8″-11 SAFE LOC.

For Item with 5/8″-11 Zinc Hub add H to the of Item with 7/8″ Arbor Hole. e.g. Item: Z5045049 with 7/8″ AH will become Z5045049H with 5/8″-11 Zinc Hub.

CATEGORIES

Premium quality Zirconia Mini Flap Disc. Made with High-Tech Zirconia Abrasive Material for best performance on all materials. Quick Change type “R” or “S” Plastic Backing. Packaged 10 per box.

Ideal for tight space. Recommended for demanding professionals who do not compromise on quality.

Mini FD require Rubber Holders. See Accessories.

quick_change_holders

ZirCUT Flap Discs are manufactured using the highest quality Self-Sharpening Zirconia Alumina abrasive material.

Discs made with continuous self-sharpening High-Tech Zirconia Alumina grain, achieve extremely high cutting rates, long lifetimes, better surface finish, and better economy.

buyersguide_abrasivematerial

Suitable for the following materials:

  • Carbon Steel
  • Stainless steel
  • Heat treated steels
  • High speed and tool steels
  • Alloyed Steels
  • Sheet metal
  • Cast iron
  • Non-Ferrous metals

Mini Flap Discs are available in two quick change versions:

Type “R” – Quick Change “R” Style (3M, Plastic). Easily attaches to and removes
from Quick Change Type “R” Holder.

Type “S” – Quick Change “S” Style (Norton, Metal). Easily attaches to and removes
from Quick Change Type “S” Holder.

type_s_mfd

Specifications

SIZES2" / 3"TYPE:Flat (Type 27)
ABRASIVE MATERIAL:Premium ZirconiaDENSITY:Standard
GRITS:36 / 40 / 60 / 80 / 120COLOUR:Blue
BACKING:PlasticQUICK CHANGER / S
MAX RPM. (OD in inches - RPM)2" - 25,000 / 3" - 20,000

Item Numbers  Packaging and Availability

For items not listed below please contact customer service. For some items minimum quantity and longer lead times apply.

Item #SizeGritTypePkg. Qty.Availability
Z502003R2" x "R"36G Z/AR106-8 WEEKS
Z502004R2" x "R"40G Z/AR10STOCK
Z502006R2" x "R"60G Z/AR10STOCK
Z502008R2" x "R"80G Z/AR10STOCK
Z502012R2" x "R"120G Z/AR106-8 WEEKS
Z502003S2" x "S"36G Z/AS106-8 WEEKS
Z502004S2" x "S"40G Z/AS106-8 WEEKS
Z502006S2" x "S"60G Z/AS106-8 WEEKS
Z502008S2" x "S"80G Z/AS106-8 WEEKS
Z502012S2" x "S"120G Z/AS106-8 WEEKS
Z503003R3" x "R"36G Z/AR106-8 WEEKS
Z503004R3" x "R"40G Z/AR10STOCK
Z503006R3" x "R"60G Z/AR10STOCK
Z503008R3" x "R"80G Z/AR10STOCK
Z503012R3" x "R"120G Z/AR106-8 WEEKS
Z503003S3" x "S"36G Z/AS106-8 WEEKS
Z503004S3" x "S"40G Z/AS106-8 WEEKS
Z503006S3" x "S"60G Z/AS106-8 WEEKS
Z503008S3" x "S"80G Z/AS106-8 WEEKS
Z503012S3" x "S"120G Z/AS106-8 WEEKS
CATEGORIES

The all-new 14” DiamondX® Cutter is the most advanced, versatile and powerful DiamondX® blade we’ve ever created. We’ve made advancements to our brazing technology to increase the speed and longevity of the blade. The higher quality diamonds are bonded to the steel core with a level of precision that is simply unmatched in the industry.

Designed for use on high speed gasoline cutoff saws and higher-powered chop saws, the 14” DiamondX® Cutter will slice through steel, stainless steel, rebar, structural steel and bolts with ease. The 14” DiamondX® Cutter will make more cuts than up to 70 conventional abrasive wheels*, greatly increasing the productivity by reducing the downtime associated with changing out worn abrasives.

Like all DiamondX® products, the new 14” DiamondX® Cutter is much safer and more eco-friendly than abrasives. The tools are made of steel and diamonds, which retain their shape, cut after cut. The steel core is virtually indestructible, providing a much safer working environment when compared to conventional abrasives that can fracture & break. Sparks, odor and debris are all greatly reduced, improving working conditions for the operator.

Applications:

Steel, Stainless Steel, Rebar, Studs, Bolts, Pipe, Sectional Tubing & More!

For use only on a high speed gas saw or a chop saw.

14” DiamondX® Cutter will outlast up to 70 14” abrasive discs*.
Results may vary depending on the application, machine, and operator.

Item Numbers  Packaging and Availability

Item #SizeRPMPkg. Qty.Availability
DXH0120P1415E14” x .150 x 1/20mm5,4001STOCK
CATEGORIES

Danish Tool is manufacture of tungsten carbide tipped tools for the construction, garden, marine and metal/fiberglass repair industries.

BLACK LABEL: Masonry handsaw with self-sharpening carbide teeth for cutting in soft bricks, blocks and mortar joints.
Recommended use on: Gas Concrete/AAC
Characteristics: Carbide Teeth

PINK LABEL: For cutting bricks, hollow blocks and mortar joints. This handsaw is also designed with our special self-sharpening carbide teeth.
Recommended use on: Hollow Blocks, Gas Concrete/AAC, Lime Stone, Brick/Brickwork
Characteristics: Carbide Teeth

GRAY LABEL: TCT masonry handsaw especially for cutting in bricks, blocks and mortar joints.
Recommended use on: Hollow Blocks, Brick/Brickwork, Foundation Block, Lime Stone
Characteristics: Carbide Teeth

WHITE LABEL: Masonry handsaw with carbide teeth for cutting in soft blocks (Leca, plaster, Siporex).
Recommended use on: Gas Concrete/AAC
Characteristics: Carbide Teeth, High Speed Cutting

Made in Denmark

Item Numbers  Packaging and Availability

Item #DescriptionSizeTPIPkg. Qty.Availability
DT200BLACK LABEL15 3/42 & 1 1/317-21 DAYS
DT201BLACK LABEL19 4/52 & 1 1/317-21 DAYS
DT202BLACK LABEL242 & 1 1/317-21 DAYS
DT196PINK LABEL15 3/42 1STOCK
DT197PINK LABEL19 4/52 1STOCK
DT198PINK LABEL242 17-21 DAYS
DT188GRAY LABEL15 3/44 1/41STOCK
DT189GRAY LABEL19 4/54 1/417-21 DAYS
DT190GRAY LABEL244 1/417-21 DAYS
DT260WHITE LABEL27 1/2 (HALF TOOTH)2/3 OR 1 1/31STOCK
DT261WHITE LABEL27 1/2 (FULL TOOTH)2/3 OR 1 1/317-21 DAYS
CATEGORIES

HIGH PERFORMANCE SINGLE ROW

HIGH PERFORMANCE SINGLE ROW DIAMOND CUP WHEELS, GENERAL PURPOSE

Recommended use on:

  • Concrete
  • Brick
  • Block
  • Precast materials
  • Stone
  • Masonry surfaces
Item #SizePkg. Qty.Availability
DCW1014 X 7/8, 5/8,20mm SINGLE ROW11-7 DAYS
DCW1024 X 5/8-11 SINGLE ROW11-7 DAYS
DCW1034.5 X 7/8 SINGLE ROW11-7 DAYS
DCW1044.5 X 5/8-11 SINGLE ROW11-7 DAYS
DCW1055 X 7/8 SINGLE ROW11-7 DAYS
DCW1065 X 5/8-11 SINGLE ROW11-7 DAYS
DCW1077 X 7/8 SINGLE ROW11-7 DAYS
DCW1087 X 5/8-11 SINGLE ROW11-7 DAYS

HIGH PERFORMANCE DOUBLE ROW

HIGH PERFORMANCE DOUBLE ROW DIAMOND CUP WHEELS, GENERAL PURPOSE

Recommended use on:

  • Concrete
  • Brick
  • Block
  • Precast materials
  • Stone
  • Masonry surfaces
Item #SizePkg. Qty.Availability
DCW2014 X 7/8 DOUBLE ROW11-7 DAYS
DCW2024 X 5/8-11 DOUBLE ROW11-7 DAYS
DCW2034.5 X 7/8 DOUBLE ROW11-7 DAYS
DCW2044.5 X 5/8-11 DOUBLE ROW11-7 DAYS
DCW2055 X 7/8 DOUBLE ROW11-7 DAYS
DCW2065 X 5/8-11 DOUBLE ROW11-7 DAYS
DCW2077 X 7/8 DOUBLE ROW11-7 DAYS
DCW2087 X 5/8-11 DOUBLE ROW11-7 DAYS

PREMIUM DOUBLE ROW

PREMIUM DOUBLE ROW DIAMOND CUP WHEELS, GENERAL PURPOSE

Recommended use on:

  • Concrete
  • Brick
  • Block
  • Precast materials
  • Stone
  • Masonry surfaces
Item #SizePkg. Qty.Availability
DCW3014 X 7/8 DOUBLE ROW11-7 DAYS
DCW3024 X 5/8-11 DOUBLE ROW11-7 DAYS
DCW3034.5 X 7/8 DOUBLE ROW11-7 DAYS
DCW3044.5 X 5/8-11 DOUBLE ROW11-7 DAYS
DCW3055 X 7/8 DOUBLE ROW11-7 DAYS
DCW3065 X 5/8-11 DOUBLE ROW11-7 DAYS
DCW3077 X 7/8 DOUBLE ROW11-7 DAYS
DCW3087 X 5/8-11 DOUBLE ROW11-7 DAYS

HIGH PERFORMANCE SEGMENTED

HIGH PERFORMANCE SEGMENTED DIAMOND CUP WHEELS, GENERAL PURPOSE, FASTER REMOVAL

Recommended use on:

  • Concrete
  • Brick
  • Block
  • Precast materials
  • Stone
  • Masonry surfaces
Item #SizePkg. Qty.Availability
DCW4014 X 7/8, 9 SEGS11-7 DAYS
DCW4024 X 5/8-11, 9 SEGS11-7 DAYS
DCW4034 X 7/8, 15 SEGS11-7 DAYS
DCW4044 X 5/8-11, 15 SEGS11-7 DAYS
DCW4054 X 7/8, 18 SEGS11-7 DAYS
DCW4064 X 5/8-11, 18 SEGS11-7 DAYS
DCW4074.5 X 7/8, 9 SEGS11-7 DAYS
DCW4084.5 X 5/8-11, 9 SEGS11-7 DAYS
DCW4094.5 X 7/8, 10 SEGS11-7 DAYS
DCW4104.5 X 5/8-11, 10 SEGS11-7 DAYS
DCW4114.5 X 7/8, 15 SEGS11-7 DAYS
DCW4124.5 X 5/8-11, 15 SEGS11-7 DAYS
DCW4134.5 X 7/8, 18 SEGS11-7 DAYS
DCW4144.5 X 5/8-11, 18 SEGS11-7 DAYS
DCW4155 X 5/8-11, 18 SEGS11-7 DAYS
DCW4167 X 7/8, 12 SEGS11-7 DAYS
DCW4177 X 5/8-11, 12 SEGS11-7 DAYS
DCW4187 X 7/8, 24 SEGS11-7 DAYS
DCW4197 X 5/8-11, 24 SEGS11-7 DAYS
CATEGORIES

Do not Require Backup Pad. SILICON CARBIDE – Suitable to work marble,
stones, building materials, very hard materials and glass.
Made in ITALY

Features/Benefits

  • Much lighter than a grinding or a cup wheel results in reduced operator fatigue.
  • Faster and cooler cutting action. The unique spiral rib grain pattern provides rapid elimination of removed material from disc surface.
  • Grinds and finishes in one operation.

Suitable for the following materials:

  • Marble
  • Stone
  • Building materials
  • Very hard materials
  • Glass
  • Fiberglass

Specifications

SIZES4 1/2" / 5" / 7′TYPE:
ABRASIVE MATERIAL:Silicon CarbideSHAPES:
GRITS:16 / 24 / 36 / 50 / 60 / 80 / 120COLOUR:Dark Grey
BACKING:DO NOT REQUIRE BACKUP PADQUICK CHANGE:
MAX RPM. (OD in inches - RPM)4 1/2" - 13,300 / 5" - 12,200 / 7’ - 8,500

Item Numbers  Packaging and Availability

Item #SizeGritMax RPMPkg. Qty.Availability
SSS450084 1/2 X 7/8 813,3005STOCK
SSS450104 1/2 X 7/8 1613,3005STOCK
SSS450204 1/2 X 7/8 2413,3005STOCK
SSS450304 1/2 X 7/8 36FB5STOCK
SSS500085 X 7/8 812,2005STOCK
SSS500105 X 7/8 1612,2005STOCK
SSS500205 X 7/8 2412,2005STOCK
SSS500305 X 7/8 3612,2005STOCK
SSS700087 X 7/8 88,5005STOCK
SSS700107 X 7/8 168,5005STOCK
SSS700207 X 7/8 248,5005STOCK
SSS700307 X 7/8 368,5005STOCK
CATEGORIES

Premium Compact Aluminum Oxide Grain, R Style (3M, Plastic) or S Style (Norton, Metal).

Suitable for the following materials:

  • Carbon Steel
  • Stainless Steel
  • Aluminum
  • Cast Iron
  • Sheet Metal

Specifications

SIZES1" / 1 1/2" / 2" / 3" / 4"TYPE:R / S / P
ABRASIVE MATERIAL:Premium Compact Aluminum OxideSHAPES:OCTAGONAL AND OTHER SHAPES AVAILABLE, PLEASE CONTACT CUSTOMER SERVICE
GRITS:80 / 120 / 180 / 240 / 320COLOUR:BROWN
BACKING:QUICK CHANGE HOLDER REQUIRED
MAX RPM. (OD in inches - RPM)1.5" - 25,000 / 2" - 25,000 / 3" - 20,000

Item Numbers  Packaging and Availability

Screw on thread on the back = R

Item #SizeGritTypePkg. Qty.Availability
A631508R1 1/280A712501-7 DAYS
A631512R1 1/2120A712501-7 DAYS
A631518R1 1/2180A712501-7 DAYS
A631524R1 1/2240A712501-7 DAYS
A631532R1 1/2320A712501-7 DAYS
A632008R280A712501-7 DAYS
A632012R2120A712501-7 DAYS
A632018R2180A712501-7 DAYS
A632024R2240A712501-7 DAYS
A632032R2320A712501-7 DAYS
A633008R380A712251-7 DAYS
A633012R3120A712251-7 DAYS
A633018R3180A712251-7 DAYS
A633024R3240A712251-7 DAYS
A633032R3320A712251-7 DAYS

Twist on metal on the back = S

Item #SizeGritTypePkg. Qty.Availability
A631508S1 1/280A712501-7 DAYS
A631512S1 1/2120A712501-7 DAYS
A631518S1 1/2180A712501-7 DAYS
A631524S1 1/2240A712501-7 DAYS
A631532S1 1/2320A712501-7 DAYS
A632008S280A712501-7 DAYS
A632012S2120A712501-7 DAYS
A632018S2180A712501-7 DAYS
A632024S2240A712501-7 DAYS
A632032S2320A712501-7 DAYS
A633008S324A712251-7 DAYS
A633012S336A712251-7 DAYS
A633018S340A712251-7 DAYS
A633024S350A712251-7 DAYS
A633032S360A712251-7 DAYS

Please contact customer service for grits not listed above.

Not listed but also available:

  • 1″ and 4″ Mini Discs
  • Velcro style
  • 2 Ply Backing
  • Mini Discs with abrasive GRIT other than ones listed above
  • Retail packaged discs
  • Mini Discs shapes other than round
  • Mini Discs Hlders
CATEGORIES

FLOOR GRINDING BLOCKS

Grinding rings and grinding discs are for heavy-duty grinding.

Suitable for the following materials:

  • Cement
  • Limestone
  • Concrete
  • Tile and clinker
  • Marble
  • Linoleum
  • Carpet backing
  • Wood
Item #SizeGritPkg. Qty.Availability
1101.127.001.0035" X 10-11mm357-21 DAYS
1101.127.001.0065" X 10-11mm657-21 DAYS
1101.127.001.0105" X 10-11mm1057-21 DAYS
1101.127.001.0145" X 10-11mm1457-21 DAYS
1114.127.001.0035" X 10mm/M14357-21 DAYS
1114.127.001.0065" X 10mm/M14657-21 DAYS
1114.127.001.0105" X 10mm/M141057-21 DAYS
1114.127.001.0145" X 10mm/M141457-21 DAYS
1114.127.001.0245" X 10mm/M142457-21 DAYS

FLOOR GRINDING RING

Grinding rings and grinding discs are for heavy-duty grinding.

Suitable for the following materials:

  • Cement
  • Limestone
  • Concrete
  • Tile and clinker
  • Marble
  • Linoleum
  • Carpet backing
  • Wood
Item #SizeGritPkg. Qty.Availability
1140.400.001.00316 X 12 X 10-11mm357-21 DAYS
1140.400.001.00616 X 12 X 10-11mm657-21 DAYS
1140.400.001.01016 X 12 X 10-11mm1057-21 DAYS
1140.400.001.01416 X 12 X 10-11mm1457-21 DAYS
1140.400.001.02416 X 12 X 10-11mm2457-21 DAYS
1144.440.001.00617 X 13 X 9mm/M10657-21 DAYS
1144.440.001.01017 X 13 X 9mm/M101057-21 DAYS
1144.440.001.01417 X 13 X 9mm/M101457-21 DAYS
CATEGORIES

Features:

The HT8 is a 200mm (8″) high performance drum floor sander with clamp bar sanding drum technology. Available with multi-speed or single speed control.

The tool rental industry’s floor sander of choice, the clamp bar drum system allows the drum rubber to be easy serviced and replaced when needed minimising downtime and service costs.The unique drum rubber resists abrasion and damage caused by exposed nails while providing the feel and touch needed to sand a fine, score free finish.

Hiretech’s patented reversible clamp bar makes it easy for the user to fit abrasives, quickly and accurately. The drop forged clamp bar will not bend or distort over time ensuring that the abrasive paper is clamped securely in place at all times. The HT8’s unique lifting pin assembly lifts the clamp bar clear of the drum when fitting or removing abrasives.

The HT8 motor is a high speed heavy duty, self cooling four brush design. The motor will not stall or slow down under load when sanding with coarse grit abrasives, removing old surface finishes, deposits of wax or dirt. This high performance ensures a fast, consistent production rate making it easy for the user to get a regular and uniform finish across the whole floor area and throughout the complete range of abrasive grits.

Completely self contained with a high efficiency dust pickup, the HT8 breaks down into three simple component parts for easy transport. The high impact ABS injection moulded side guards and drum guard will not scar or scuff walls and protect the HT8 during transport.

The HT8 will sand all types of wooden floors including parquet to a fine score free finish. The HT8 can also be used on a wide range of other surfaces including some types of decking, fibre board, cork, engineered and composition floors.

  • No volt safety switch prevents accidental start-up.
  • Choice of single speed or multi-speed switch.
  • Powerful 4 pole (brush) motor geared 3:1, up to 4.5hp at the drum.
  • Dynamical balanced sanding drum.
  • Tough clamp bar style drum.
  • High impact resistant ABS guards.
  • High powered vacuum system.
  • Disposable paper or cloth dust bags.
  • 2 year warranty.

Item Numbers  Packaging and Availability

Item #Description
07006SINGLE-SPEED
07006MSMULTI-SPEED
CATEGORIES

CRIMPED, CARBON STEEL

GENERAL PURPOSE
Crimped wire brushes are suitable for cleaning large surfaces and conform
to irregular or contoured surfaces. Softer brushing action than knot wire brushes.

Suitable for the following materials:

  • Surface cleaning
  • Rust
  • Paint
  • Finishing
  • Light deburring

Item Numbers  Packaging and Availability

Item #SizeMax RPMWirePkg. Qty.Availability
EXYH305A3" x 5/8"-1114,0000.014"1STOCK
EXYH405A4" x 5/8"-119,0000.014"1STOCK

KNOTTED BANDED, CARBON STEEL

HIGH REMOVAL, LONG LIFE
A special design allows access to angles and flexible performance on any surface.

Suitable for the following materials:

  • Slag
  • Rust
  • Metal
  • Welds
  • Paint

Item Numbers  Packaging and Availability

Item #SizeMax RPMWirePkg. Qty.Availability
EXYG315A2-3/4"×5/8"-1114,0000.020"1STOCK
EXYG415A4"×5/8"-119,0000.020"1STOCK

For Item with 5/8″-11 Quick Change Hub remove 2 in the front and add L to the end of Item Number with 7/8″ Arbor Hole. e.g. Item: 2A704503 with 7/8″ AH will become A704503L with 5/8″-11 Quick Change Hub. Quick Change Hub available only for discs with 7/8 Arbor Hole.